Adding a dopant increases electrical conductivity. The choice of dopant is a critical factor in semiconductor manufacturing, influencing the performance and applications of electronic devices.
Types of Extrinsic Semiconductor
Extrinsic Semiconductor Band Diagram
Uses and Applications
Intrinsic vs. Extrinsic Semiconductors
1. N-type
An N-type semiconductor is created by adding impurity atoms that have more electrons than the semiconductor material itself. Group V elements such as phosphorus (P), arsenic (As), and antimony (Sb) have five valence electrons (pentavalent) and are commonly used as dopants. When these pentavalent impurities replace some of the host semiconductor atoms, they introduce an extra electron into the crystal structure. These additional electrons contribute to the semiconductor’s conductivity, making it more efficient in carrying an electric current.
2. P-type
A N-type semiconductor is created by adding impurity atoms with fewer electrons than the semiconductor material. Group III elements, such as boron (B), aluminum (Al), and gallium (Ga) with three valence electrons (trivalent), are typically used in this context. Introducing trivalent impurities creates holes in the crystal structure, where electrons are missing. These holes can move through the material as electrons from neighboring atoms jump to fill the gaps. Thus, the holes act like positive charge carriers and enhance the semiconductor’s overall conductivity.
Valence Band: The lower energy band filled with electrons.Conduction Band: The higher energy band where electrons can move freely, contributing to electrical conductivity.Band Gap: The energy gap between the valence band and the conduction band. Electrons need energy to jump from the valence band to the conduction band.
Depending on the type, the extrinsic semiconductor energy band diagram consists of two more levels in addition to the conduction and valence bands. For an N-type semiconductor, the extra electrons from the dopant atoms form a new energy level just below the conduction band, called the donor level. At room temperature, it takes very little energy for these electrons to move from the donor levels to the conduction band, making them free to conduct electricity. For a P-type semiconductor, the missing electrons create a new energy level just above the valence band. This level is called the acceptor level. When electrons from the valence band jump to the acceptor levels, they leave behind holes in the valence band, which can move and carry positive charges. The energy band diagram below illustrates an N-type and a P-type semiconductor.
